Chronology and tips for laying a slate floor with an example in a new apartment in the the procedures described here can be viewed by interested client with the author of the article. Origin: Brazil, a source may send mail to the editors like to be asked is because not related to natural slate in every hardware store around the corner, we chose a vendor in the Hunsruck. Here is traditionally expected of high expertise, as the Hunsruck Slate is one of the most important regions. Natural slate is indeed only rarely in this region, the quality of almost entirely imported material but should be evaluated by experts. How well the product actually shows itself only when it is delivered - the choice is, therefore, to a large part of trust. Preparation: The soil should be turned, it can use a tile adhesive, tile adhesive "would be good. The binding to the plate is sufficient. The processing is similar to the bonding of conventional tiles.
A primer was not performed. Are small differences in height acceptable, it is sufficient to glue with 10 mm notched trowel. Basically, it has been shown that a pre-sorting should be done carefully to material thickness. Also facilitated a pre-structure the subsequent laying. Here commercial tile crosses were used with 4 mm - wider gaps facilitate the settlement of differences in height. In this particular example, the relatively wide joints as well as up to 1.5 cm thick bed of adhesive was used to move around various wires.
A primer was not performed. Are small differences in height acceptable, it is sufficient to glue with 10 mm notched trowel. Basically, it has been shown that a pre-sorting should be done carefully to material thickness. Also facilitated a pre-structure the subsequent laying. Here commercial tile crosses were used with 4 mm - wider gaps facilitate the settlement of differences in height. In this particular example, the relatively wide joints as well as up to 1.5 cm thick bed of adhesive was used to move around various wires.
Recent Comments