Traffic

On the generalized scheme of sensors designated as sensors phases. Measurement of cyclic feeding and Backleak performed using beakers with a graduated scale or by automatic meters (BOSCH EPS 815, HARTRIDGE AVM2-PC) are measured in real time the amount of fuel in sections. Educate yourself even more with thoughts from drawer pulls . At the same time construct a histogram of the measured fuel consumption for the sections on the computer monitor. When the process is menzurochnom loading fuel at the same time from all sections in the beaker for a specified number of cycles and then a visual readout on a scale at the level of beaker to determine the cyclic feeding. Both methods of measurement has its own advantages and disadvantages. Gain insight and clarity with cabinet hardware. Automatic method is more accurate - it depends on the accuracy of the flowmeter.

The values of the feed will automatically get into the program, calculated uneven feeding sections, the result is given comparison with normative values. At loading in the beaker can be visually determined immediately supply the qualitative difference of the different sections and not to filling according to the standards of test plan in full, reducing the time adjustment which is important for the mechanical fuel pump at the beginning of settings with sufficient experience of the traffic controller. At the same time for this method of measurement accuracy below for the following reasons: - for the accuracy of reading values from the scale beakers responsible regulator - after draining the walls of beakers is the fuel that the next measurement introduces an additional error - individual blisters formed in the bulk, despite the established defoamers, do not allow to clearly define the boundary of fuel level in the beaker.